Device Description; Residual Risk - Gude GDS 75 Originalbetriebsanleitung

ENGLISH
20
It is strictly prohibited to disassemble,
modify and purposely remove the protective
equipment on the unit and fit other protective
equipment instead.

Device description

6
5
1. Protective screen
2. abrasive wheel
3. Workpiece support
4. Bore for work bench mounting
5. On/off Button
6. Polishing wheel
7. Adapter

Residual Risk

Even when the device is used properly and all safety
regulations are complied with, there still may be
some residual risks.
· Never put your hand in the grinding disc area.
· Risk of injury for fingers and hands if the tool to
be ground is guided or supported incorrectly.
· Tool parts flying off
· noise emissions
· dust emissions
· vibrations to hand and arms
· Danger of burns
· Tool and workpiece heat up during operation.
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
1
7
2
3
4
Symbols
Warning/Caution!
Warning - Read the operating
instructions to reduce the risk of injury.
Unplug the machine before any work
on it.
Wear eye protective goggles !
Wear ear protectors!
Wear a suitable dust protection mask.
Wear protective shoes.
Always keep children and unauthorised
persons out of reach of the appliance.
Reaching in prohibited
Keep dry at all times.
Never expose tool to rain.
Forbidden operation for persons with
chainlet
Do not operate the power tool when
wearing a tie
Forbidden operation for persons with
long hair.
Protect against cold
Warning: draw-in hazard
Warning against dangerous voltage
Ensure others are a safe distance away
from the machine (min. 5 m)
Warning against thrown-off items
Not suitable for wet grinding