Specified Conditions Of Use; Power Tool Description; Emergency Procedure - Gude GDS 125 A Originalbetriebsanleitung

ENGLISH
22
Read and understand the operating instructions
before using the appliance. Abide by all the safety
measures stated in the service manual. Act responsib-
ly toward third parties.
In case of any doubts about connection and operation
refer please to our customer center

Specified Conditions Of Use

Double grinding machines for removing frays, grinding
and sharpening of steel and steel alloy workpiecesDo not
use this product in any other way as stated for normal
use. Respecting technical data and safety precau-
tions.Not observing general regulations in force and
instructions from this manual does not make the
manufacturer liable for damages.

Power tool description

1. Grinding wheel with magnifier
2. Abrasive wheel cover
3. work table installation opening
4. O OFF switch
5. workpiece support
6. abrasive wheel K36
7. Protection against sparks
8. abrasive wheel K60
Residual risks
Danger of injury !
Never put your hands to the abrasive wheel area.
Risk of injury for fingers and hands due to rotating
abrasive wheels in case of unprofessional guiding
or supporting of the workpiece being ground.
In spite of compliance with all relevant design
regulations, dangers may still present themselves
when the machine is operated, e.g.
- work piece parts being thrown off,
- parts of damaged tools being thrown off,
- noise emissions,
- dust emissions.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to
replace any used material in the first-aid kit immedia-
tely after it has been used.
If you seek help, state the following pieces of infor-
mation
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
qualification Apart from the detailed instructions by
a professional, no special qualification is necessary
for appliance using.
Minimum age Persons over 16 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
The operator is responsible for accidents or risks to third
parties.
Symbols
warning/caution!
Read the Operating Instructions!
before carrying out any work on the machi-
ne, disconnect the plug from the socket.
wear eye protective goggles !
wear ear protectors!
wear a respirator!
wear protective gloves !
Portez des chaussures de sécurité avec pointes
en acier !