Fronius TransPocket 4000 CEL Bedienungsanleitung Seite 90

TIG Comfort Stop
1
2
3
4
5
TIG welding process with the optional TIG Comfort Stop function activated
(1)
(2)
(3)
(4)
90
. 1
Welding
Raise the welding torch: the arc length is increased significantly
Lower the welding torch:
– The arc length is decreased significantly
The TIG Comfort Stop function is triggered
–
Keep the welding torch at the same height
The welding current is continuously decreased (downslope)
–
Arc goes out
–
Wait for the gas post-flow time to finish and lift the welding torch off the workpiece
I
(1)
Gas pre-flow
Set welding current
DownSlope
Gas post-flow
. 2 . 3
(2)
. 4
t
(3) (4)