Mounting The Everywhere Trolley; Safety; Fitting The Power Source To The Trolley - Fronius TransPocket 4000 CEL Bedienungsanleitung

Mounting the Everywhere trolley

Safety

Risk of electric shock.
If the device is plugged into the mains during installation, there is a high risk of serious in-
jury and damage to property.
► Only carry out work on the device if the mains switch is in the "O" position.
► Only carry out work on the charger when it has been disconnected from the mains sup-
Fitting the power
source to the trol-
ley
Inserting the locking devices
Power source and trolley
Positioning the shims and wing nuts
WARNING!
ply.
(1) (1)
X
(2) (3) (2)
Insert the locking devices (1) in the ho-
1
les on the trolley base
Position the locking devices (1) at an
2
angle as far as they will go
IMPORTANT! When positioning the power
source vertically, make sure that the mains
cable is not kinked, pinched or strained.
Carefully position the power source
3
vertically at the rear
Carefully position the trolley vertically
4
at the rear
Push the trolley against the power
5
source so that the trolley and the pow-
er source are centrally aligned opposi-
te each other
Position the shims (2) on the six threa-
6
ded bolts and slightly tighten wing nuts
(3)
(3) (2) (3)
81