Layout Clatronic.book Seite 67 Donnerstag, 9. Februar 2006 9:41 09
Adjusting the volume
Creating a playlist
NOTE:
Further settings concerning the subject "Viewing Angle"
69, "Angle mark".
Press the + button (Fig. 2/8) to increase the volume.
Press the - button (Fig. 2/10) to reduce the volume.
NOTE:
Please remember, that this will only change the output volume of
the DVD-Player. In order to adjust the volume to your
requirements you may also have to change the volume of the
replay device.
You may want to replay the titles, e.g. on a CD, in a different order
to the order determined by the producer. The function "Create
Playlist" you can create your own playing order. To do this, proceed
as follows:
1. Press the PROGRAM-button.
You will now see a table. Here you enter the desired order of
tracks (for CDs) or chapters/titles (for DVDs).
NOTE:
However, your playlist will be lost when switching off the DVD-
Players or when inserting a new CD/DVD.
2. Use the Cursor Buttons (Fig. 2/14) to navigate in the table.
3. At the corresponding table position enter the desired track (for
CDs) or the desired title and chapter (for DVDs). Use the
Numerical Buttons e.g. 05 (Fig. 2/17) for this purpose.
4. Use the Cursor Buttons (Fig. 2/14) to select the command "Play"
at the bottom of the table to save the input.
5. Press the Play-button (Fig. 2/27) on the remote control to confirm
this command.
Creating an MP3-Playlist
When inserting an MP3-CD, the file selection dialog ( Page 84,
"Selecting MP3 files and starting replay") will open.
Please proceed as follows to create a playlist:
1. Use the Cursor Buttons (Fig. 2/14) to select the title you want to
add to the playlist.
2. Press button CLEAR (Fig. 2/28). The function information line
(Fig. 62/12) displays "Add to Playlist".
3. To enter the playlist press the PROGRAM-button (Fig. 2/20), until
the function information line (Fig. 62/12) displays "Playlist".
4. Press the Play-button (Fig. 2/27) to start replaying the playlist.
Playing media
Page
67