Installation Of The Oven - Kaiser EH Serie Gebrauchsanweisung

16
EN
If the appliance is to be connected
directly to mains terminals, fit a
switch with minimum aperture of 3
mm between the contacts. Make
sure that the switch is of sufficient
capacity for the power specified on
the appliance's data plate, and com-
pliant with applicable regulations.
The switch must not break the yel-
low-green earth wire. The socket or
switch must be easily reachable with
the oven fully installed.
Attention! Installation and
electrical connection must be
excuted by a qualified expert
only.
Attention! The manufacturer
declines all responsibility for
damage or injury if the above
instructions and normal safety
precautions are not respected.

INSTALLATION OF THE OVEN

The oven can be installed under a
work top or in a cooking column. Fig-
ure shows the installation dimen-
sions. Make sure that surrounding
materials are heat resistant. Align
the oven centrally with respect to the
side walls of the units surrounding it
and fix it in place with the screws
and Allen screws provided.
See the accompanying instructions
for combining the oven with multi-
functional gas or gas-electric cook-
ers.