16
EN
If the appliance is to be connected
directly to mains terminals, fit a
switch with minimum aperture of 3
mm between the contacts. Make
sure that the switch is of sufficient
capacity for the power specified on
the appliance's data plate, and
compliant with applicable regula-
tions. The switch must not break
the yellow-green earth wire. The
socket or switch must be easily
reachable with the oven fully in-
stalled.
Attention!
Installation and
electrical connection must be
excuted by a qualified expert
only.
Attention! The manufacturer
declines all responsibility for
damage or injury if the above
instructions and normal safety
precautions are not respect-
ed.
INSTALLATION OF THE OVEN
The oven can be installed under a
work top or in a cooking column.
Figure shows the installation di-
mensions. Make sure that sur-
rounding materials are heat re-
sistant. Align the oven centrally with
respect to the side walls of the units
surrounding it and fix it in place with
the screws and Allen screws pro-
vided.
See the accompanying instructions
for combining the oven with multi-
functional gas or gas-electric cook-
ers.