8
EN
TECHNICAL SAFETY
• Installation of this appliance must
be performed only by a licensed
specialist.
• Check the appliance for visible
signs of damage before using it. If
the appliance has been damaged
in transport, do not connect it.
Never use a damaged appliance!
It could be dangerous!
• Repairs should be performed by a
licensed technician only. Im-
proper repair may result in con-
siderable danger to you and oth-
ers. If your appliance needs
repair, contact a Service Centre
or your dealer.
• If the supply cord is damaged, it
must be replaced by the manufac-
turer, its service agent or similarly
qualified persons in order to avoid
a hazard.
• Electrical leads and cables must
not be touching the appliance.
• The appliance should be con-
nected to the mains power supply
by means of an approved circuit
breaker or fuse. Never use multi-
ple plug adapters or extension
leads to connect appliance to the
mains electricity supply.
•
The power supply of the appli-
ance should be turned off before
repair or clean.
•
This appliance must not be used
in a non-stationary location (for
example on a ship).
Attention!
To avoid the pos-
sibility of electric shock, the
appliance should be pow-
ered down before replacing
the
lamp.