Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TO END LAP
-
Press PLAY KEY again and display temporarily goes away with END LAP displayed on lower
section of console.
•
Display returns with Time paused and THIS.LAP displayed on lower section of console.
•
After 5 seconds, full display returns with total accumulated Time and Distance from beginning
of program. Watts and Heart Rate return to lower section of screen.
-
LAP has been recorded.
-
At this point rider is in a Recovery Phase prior to beginning another LAP or ending ride.
NEXT LAP
-
If PLAY KEY is pressed again, the cycle described above will repeat.
•
THIS.LAP displays on lower section of console, replacing display of Watts and Heart Rate.
o The Time display will reset to 0.00.
o The Distance display will reset to 0.00.
-
After 5 seconds, LAST.LAP appears, flashing 3 times.
o Time and Distance will show Total Time and Distance from Previous Lap.
o Words LAST.LAP will flash, then THIS.LAP will be displayed for 5 seconds.
•
Cycle will repeat until PLAY KEY is pressed, then LAP data displays for 5 seconds, then last
lap for 5 seconds, then exit to total workout display.
TO END WORKOUT
NOTE: If the LAP feature is ENABLED in
MAINTENANCE MODE, ending ALL Programs
requires pressing and holding the PLAY KEY for
3 seconds to END RIDE OR USER.
END RIDE or USER
-
Press and hold PLAY KEY for 3 seconds,
•
All current data will pause
•
Screen displays END RIDE or USER
•
Press either + or – KEY to toggle between END RIDE and USER.
o Press PLAY KEY to select
If END RIDE is selected
-
•
Screen displays END WORKOUT
•
NO will flash on display
•
Press either + or – KEY to toggle between NO and YES for desired action
o Pressing PLAY KEY while NO will revert to existing PROGRAM
62
Werbung
Kapitel
Inhaltsverzeichnis
