Close The Housing - Fronius Primo serie Serviceanleitung, Ersatzteilliste

Opening the housing
Close the hous-

Close the housing

ing
118
(5) (5) (6)
(1)
IMPORTANT! The included angle must not
exceed 11°.
In the connection area pull the inverter
5
forwards from the wall bracket, then lift
the inverter and remove it from above.
Loosen 4 x 5x18 mm TX25 screws (5)
6
and the sealing washer until the power
module cover (6) can be removed.
(5)(5)
Make sure the 15 x EMC springs (1)
1
are correctly positioned.