Setting Entries On The Setup Menu, General - Fronius SnapINverter Serviceanleitung

Setting entries on
1
the Setup menu,
2
general
3
The first digit of a value to be set flash-
es:
4
5
The second digit of the value flashes.
6
the whole value to be set flashes.
7
8
9
The currently selected menu item is dis-
played.
Entering the SETUP menu item
Use the 'Up' or 'Down' keys to select the desired menu item
Press 'Enter'
Use the 'Up' or 'Down' keys to select
a value for the first digit
Press 'Enter'
Repeat steps 4 and 5 until ...
Press 'Enter'
Repeat steps 4 - 6 as required for
units or other values that are to be set
until the appropriate unit or the value
flashes.
Press the 'Enter' key to save and ap-
ply the changes.
To discard the changes, press the
'Esc' key.
The available settings are displayed:
Use the 'Up' or 'Down' buttons to se-
4
lect the desired setting
Press the 'Enter' key to save and ap-
5
ply the setting.
To discard the setting, press the 'Esc'
key.
The currently selected menu item is dis-
played.
55