Replacing The Recerbo Display Pc Board - Fronius Primo serie Serviceanleitung, Ersatzteilliste

Replacing the RECERBO display PC board

Replacing the RE- Removing the RECERBO:
CERBO display
PC board
Installing the RECERBO:
134
(1)
(2) (2)
(4) (3)
WARNING! An electric shock can
be fatal. Follow the safety rules
(see start of "Safety" chapter).
Remove the inverter from the wall bra-
1
cket, open, and remove the Datamana-
ger card (see "Opening and Closing
the Device" and "Replacing the Data-
manager Card" sections)
Remove the external fan cable from
2
the cabling (1).
Push the locks (2) on the RECERBO
3
holder upward
Remove the RECERBO assembly
4
NOTE! In the next two steps, en-
sure that no components are dam-
aged.
Remove the holder (3) from the
5
RECERBO
Remove the breakaway PC board (4)
6
from the faulty RECERBO