Yamaha RXV-1700 Bedienungsanleitung Seite 106

REMOTE CONTROL FEATURES
■ Clearing a learned function
You can clear the function learned for a certain button in
each control area.
1
Set the operation mode selector to AMP or
SOURCE and then press an input selector
button, or to select the input area
containing the function you want to clear.
The selected component name appears in the display
window.
AMP
SOURCE
TV
or
AMP
SOURCE
TV
2
Press LEARN using a ballpoint pen or similar
object.
"LEARN" and the selected component name
(ex. "DVD") appear alternately in the display
window.
LEARN
Notes
• Do not press and hold LEARN. If you hold it down for
more than 3 seconds, the remote control enters the remote
control code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, start over from step 2.
104
En
PHONO TUNER CD MULTI CH IN
V - AUX/DOCK
CBL/SAT MD/TAPE
CD-R
DTV VCR 1 DVR/VCR 2 DVD
3
Press and hold CLEAR using a ballpoint pen
or similar object and then press the button
you want to clear for about 3 seconds.
"C;OK" appears in the display window if clearing
was successful. Once "C;OK" appears in the display
window on the remote control, release the ballpoint
pen or similar object used to press CLEAR to exit the
clearing mode. The remote control returns to the
learning mode.
MODE PTY SEEK START
LEARN CLEAR RENAME
y
• If you continuously want to clear another function, repeat
step 4.
• If you continuously want to clear another function for
another component, press SELECT k / n to select the
input area, then repeat step 4.
• Once you clear a learned function, the button reverts to the
factory setting (or to the manufacturer setting if you have
set remote control codes).
4
Press LEARN again to exit.
Notes
• "C;NG" appears in the display window on the remote control if
clearing was unsuccessful. In this case, start over from step 2.
• "ERROR" appears in the display window if you press more than
one button simultaneously.