Yamaha RX-V663 Bedienungsanleitung Seite 92

Customizing this unit (MANUAL SETUP)
■ Zone 2 settings
F)ZONE2 SET
.
MAX VOL.;;;+16.5dB
INIT. VOL.;;;;;OFF
[ ]/[ ]:
[p]/[[]:
Zone 2 Maximum volume MAX VOL.
Use this feature to set the maximum volume level in the
Zone 2.
Control range: –30.0 dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB
Notes
• The "MAX VOL." setting takes priority over the "INI.VOL."
setting. For example, when "INI.VOL." is set to –20.0 dB and
then "MAX VOL." is set to –30.0 dB, the volume level is
automatically set to –30.0 dB when you turn on the power of
this unit next time.
• The "MAX VOL." setting does not affect the output level at the
"ZONE 2 OUT" jacks.
Zone 2 Initial volume INI.VOL.
Use this feature to set the volume level of Zone 2 when the
power of this unit is turned on.
Choices: OFF, MUTE, –80.0 dB to +16.5 dB
Control step: 0.5 dB
Notes
• The "MAX VOL." setting takes priority over the "INI.VOL."
setting.
• When you select "FRONT B", "PRNS", "Zone B", or "NONE"
in "EXTRA SP ASSIGN" (see page 76), "Zone 2 SP Not
Assigned" appears in the OSD and the "ZONE2 SET"
parameter is not available.
• The "INI.VOL." setting does not affect the output level at the
"ZONE 2 OUT" jacks.
90
En
F)ZONE2 SET
Up/Down
Adjust