Yamaha RX-V2700 Bedienungsanleitung Seite 86

GRAPHIC USER INTERFACE (GUI) SCREEN
The Compressed Music Enhancer mode parameter descriptions
The Compressed Music
Enhancer mode
2ch Enhancer
7ch Enhancer
Decoder parameter descriptions
Decoder parameter
Pro Logic IIx Music
PRO LOGIC II Music
Panorama
PRO LOGIC IIx Music
PRO LOGIC II Music
Dimension
PRO LOGIC IIx Music
PRO LOGIC II Music
Center Width
DTS Neo:6 Music
Center Image
Initialize (Program parameters initialization)
Use this feature to initialize the parameter of the selected sound field program.
Choices: No, Yes
• Select "Yes" to set the program parameters to the factory default settings.
• Select "No" to cancel the program parameter initialization.
y
Use the "Sur. Initialize" feature in "Option" to initialize the parameters of each sound field program within a sound field program group
(see page 105).
84
En
2-channel enhancer or 7-channel enhancer effect level. Select "High" or "Low" to adjust the effect for
the high-frequency.
Choices: High, Low
Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as
well as the front speakers for a wraparound effect.
Choices: Off, On
Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards the front
or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the front)
Initial setting: STD (standard)
Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output completely
towards the center speaker or towards the front left and right speakers. A larger value moves the center
channel output towards the front left and right speakers.
Control range: 0 (center channel sound is output only from the center speaker) to
7 (center channel sound is output only from the front left and right speakers)
Initial setting: 3
DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the center
channel to make the center channel more or less dominant as necessary.
Control range: 0.0 to 1.0
Initial setting: 0.3
SB Room Size
Dialogue Lift
Initialize
Features
Features
No
Yes