Yamaha RX-V2700 Bedienungsanleitung Seite 85

Sound field parameter
Rev. Level
Dialogue Lift
Stereo program parameter descriptions
Sound field parameter
2ch Stereo
Direct
7ch Stereo
Center Level
Surround L Level
Surround R Level
Sur. Back Level
Presence L Level
Presence R Level
Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the
stronger the reverberation becomes.
Control range: 0 to 100%
Dialogue lift. Adjusts the height of the front and center channel sounds by assigning some of the
front and center channel elements to the presence speakers. The larger the parameter, the higher
the position of the front and center channel sound.
Choices: 0, 1, 2, 3, 4, 5
2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo
sound when playing 2-channel analog sources.
Choices: Auto, Off
y
• Select "Auto" to bypass the decoders, DSP processors and the tone control circuitry only when
"BASS" and "TREBLE" are set to 0 dB (see page 52).
• Select "Off" not to bypass the decoders, DSP processors and the tone control circuitry when
"BASS" and "TREBLE" are set to 0 dB.
• When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2
channels and output from the front left and right speakers.
• The low-frequency signals input from the front left and right speakers are redirected to the
subwoofer in the following cases:
– "Bass Out" is set to "Both" (see page 98).
– "Front" is set to "Small" (see page 96) and "Bass Out" is set to "SWFR" (see page 98).
7-channel stereo center, surround left, surround right, surround back, presence left and presence right
levels. Adjusts the volume level of each channel in the 7-channel stereo mode.
Control range: 0 to 100%
GRAPHIC USER INTERFACE (GUI) SCREEN
Features
Source sound
Rev. Level
Features
Time
83
En