Electrolux PD91-ANIMA Gebrauchsanweisung Seite 2

1 2 3 4
www.electrolux.com
ENGLISH using carpet cleaning powder. For best possible performance, use the
GB
Ultra Long Performance bag which is especially developed for your
Thank you for choosing Electrolux PURED9 vacuum cleaner. Always
cleaner. Other synthetic s-bags can also be used. Do not use paper dust
use original accessories and spare parts to get the best results. This
bags! www.s-bag.com
FR
product is designed with the environment in mind. All plastic parts are 12
Pull the S-BAG button to open the dust compartment. The handle of
marked for recycling purposes.
the s-bag holder goes up. Pull the handle to remove the s-bag with
holder. Do not press the release button.
AR
BEFORE STARTING
13 Hold the s-bag with holder over a dust bin. Press the button to release
• Read this manual carefully.
the s-bag. Insert a new s-bag to the holder by inserting the cardboard
• Check that all parts described are included.
BG at the back of the holder.
• Pay special attention to the safety precautions!
14 Insert the s-bag with holder by pushing it straight down in its tracks.
Make sure the s-bag is not stuck under the holder. Close the lid. If the
CZ DESCRIPTION OF PURED9 VACUUM CLEANER
s-bag is not properly placed or is missing, the lid will not close.
A. Display (see versions later) Q. Display for models with remote NB: When you start the cleaner after s-bag replacement, It takes 10
seconds before the S-BAG indicator turns o (P* Models with rotary
DE B. Exhaust lter lid control*
knob and Q* Models with remote control) or turns green (R* Models
C. Exhaust lter R. Display for models with remote
D. Parking slots control and AUTO function* with remote control and AUTO).
DK E. Power cord S. AeroPro Classic handle*
F. Motor lter T. AeroPro Ergo handle* REPLACING THE FILTERS
G. Motor lter holder U. AeroPro Remote Control 15
Replace/clean** the lter when (**washable lter only)
EE
H. S-bag® handle*
- P* Models with rotary knob: you have changed the s-bag 5 times
I. S-bag® holder V. AeroPro FlowMotion nozzle* - Q* Models with remote control: FILTER symbol lights up in red
J. Dust compartment cover W. AeroPro PureVision nozzle
- R* Models with remote control and AUTO: lter indicator lights up
ES
K. AeroPro 3in1 tool (with front lights)*
in red. Green light indicates that the lter is ok. It lights up brie y when
L. AeroPro hose X. AeroPro Turbo nozzle*
you start the vacuum cleaner.
M. AeroPro handle (see versions Y. AeroPro Mini Turbo nozzle*
16
FI Pull the FILTER button to open the lter lid. Use original s- lters.
later) Z. ParkettoPro nozzle*
Remove the lter and check the reference on the frame to de ne type.
N. AeroPro telescopic tube AA. AeroPro FlexProPlus nozzle*
Replace with a new lter or clean it**. Rinse the inside (dirty side) in
O. Parking clip AB. AeroPro Long crevice nozzle*
GR
lukewarm tap water. Tap the lter frame to remove the water. Repeat
P. Display for models with rotary
the process four times. (**washable lter only)
knob manual control* * Certain models only
NB: Do not use cleaning agents. Avoid touching the lter surface.
HR
Let the lter dry completely (min. 24 h in room temperature) before
HOW TO USE THE VACUUM CLEANER putting back ! Change the washable lter at least once a year or when it
HU 1 is very dirty or damaged. Do not remove the L-shaped foam under the
Open the dust compartment cover by pulling the S-BAG button. Check
lter.
that the dust bag (s-bag) is in place.
17
After replacing the lter, close the lter lid until it is clicked back into
2
Insert the hose into the cleaner (to remove it, press the lock buttons
IT place. If the lter lid comes o , position the hinges at the bottom and
and pull). Insert the hose into the hose handle until the lock button
push the lter lid until it is clicked back into place.
clicks (to release it, press the lock button and pull).
NB: When you start the cleaner after lter replacement, It takes 10
LT 3 Attach the telescopic tube to the nozzle. Attach the telescopic tube to
seconds before the FILTER indicator turns green (models with remote
the hose handle (to remove it, press the lock button and pull).
control and AUTO function) or turns o (remote control models).*
4 Adjust the telescopic tube by holding the lock with one hand and 18
Replace the motor lter when dirty or after every 5th s-bag. Push the
LV
pulling the handle with the other hand. lter holder down and pull it out. Exchange the lter and close the lid.
NL START/STOP THE VACUUM CLEANER AND ADJUST SUCTION POWER VACUUMING WITH THE UNIVERSAL NOZZLE V*, W*
5
Pull out the power cord and plug it into the mains. Press the ON/ 19 Change nozzle setting with the pedal. Icon illustrates recommended
OFF button to turn the cleaner on/o . Indicators light up, MIN/MAX oor type.
NO
indicator lights up from left to right and back (auto function models).*
20
PureVision nozzle*: Move the nozzle forward. The front light turns on
Models with remote control can also be operated by the ON/OFF
automatically after a few seconds. When the nozzle is not used, the
button on the handle.*
PL light turns o automatically after a few seconds.
6 Adjust suction power (manual control models): Turn the rotary knob on
the cleaner or use the air valve on the handle.*
CLEANING THE UNIVERSAL NOZZLE V*, W**
PT 7
Adjust suction power (remote control models): Press +/- button on the
21 Disconnect the nozzle from the tube. Clean with the hose handle.
handle. MIN/MAX and symbols indicators on display will show level of
power.*
RO CLEANING THE TURBO NOZZLE X*
8
Adjust suction power (remote control models with AUTO): The cleaner
22 Disconnect the nozzle from the tube and remove entangled threads etc
starts in AUTO mode (automatic power regulation). AUTO indicator is
by snipping them away with scissors. Use the hose handle to clean the
RU illuminated on the display and MIN/MAX indicator pulses. To regulate
nozzle. *
power manually press +/- button on handle. Press AUTO button to
return to auto-function.*
SE
9 3IN1 ACCESSORY TOOL
After cleaning, push the REWIND button to rewind the cable.
23 Pull the textile tab to take out 3in1 tool. The tool has 3 functions, see
pictures on next page.
SK PARKING POSITIONS
24 After usage, put it back in its place.
10
Use parking position on the side (A) or underneath (C) to carry and
store the cleaner. At the back (B) when you pause (save your back).
SL
REPLACING THE DUSTBAG, S BAG®
SR 11 Replace the s-bag when
- P* Models with rotary knob: S-BAG indicator lights up in red
- Q* Models with remote control: S-BAG symbol lights up red.
TR
- R* Models with remote control and AUTO: S-BAG indicator lights up
in red (green light: bag is OK, yellow light: soon time to replace bag).
NB: Always change the s-bag when S-BAG indicator is illuminated or
UA
has red light even if the s-bag is not full (it may be blocked) and after
2 www.electrolux.com 2
5 6 7 8
9 10
11 12 13 14
15 16 17 18
19 20 21 22
23 24 25 26
www.electrolux.com 3