Docking Station; Controls On The Master Docking Station - Viking MI 632 M Gebrauchsanleitung

Insert loose, unstripped wire ends (1) to
the stop in the wire connector (2). Press
the wire connector together using suitable
pliers – ensure correct engagement.
Attach the perimeter wire strain relief to the
ground with two fixing pins as illustrated.
144

13. Docking station

13.1 Controls on the master docking
station
A circular red LED (1) provides information
on the status of the master docking station
and the wire signal.
The button (2) is used to switch the master
docking station on and off.
In addition, this button can be used to bring
all robotic mowers back to the docking
stations (Homecall).
LED does not illuminate:
– The master docking station and wire
signal are switched off (standby).
LED illuminates continuously:
– The master docking station and wire
signal are switched on.
– Robotic mower is not docked.
LED flashes slowly (2 seconds on –
briefly off):
– Robotic mower is docked, battery is
charging if required.
– The master docking station and wire
signal are switched on.
LED flashes rapidly:
– Perimeter wire is interrupted – wire
break or wire is not correctly connected
to the master docking station. (
LED illuminates for 3 seconds, followed
by 1 second pause:
– Homecall was activated.
LED gives 3 short flashes, 3 long
flashes, 3 short flashes, followed by
approx. 5 second pause (SOS signal):
– Error in the master docking station.
Switching the master docking
station on and off:
The docking station is switched on
and off automatically during automatic
operation.
If the robotic mower is not docked, briefly
pressing the button activates the master
docking station. The wire signal remains
active for 48 hours if the robotic mower
has not previously docked.
Pressing the button for 2 seconds
switches off the master docking station.
Homecall:
Briefly pressing the button twice
within 2 seconds during a
mowing operation activates the
Homecall.
All robotic mowers end the running
mowing operation, search for the
perimeter wire and return to the docking
stations to recharge their batteries. No
further mowing operation takes place in
the current active time.
Homecall remains active until the
robotic mower is docked and
cannot be aborted.
0478 131 9937 B - EN
16.7)