Hybrid Giant Handbuch Seite 13

EnergyPak Smart 375 (side integrated)
Removing the EnergyPak.
∙ Hold the battery in the frame to make sure it
cannot drop when unlocking.
∙ Insert the key and unlock the EnergyPak. The
Energypak will be ejected slightly.
∙ Some models have an extra anti-drop
protection. Push the plastic tab underneath
the battery (light grey arrow) to release the
EnergyPak.
∙ Pull the battery out of the bike.
Charging the EnergyPak.
∙ Connect the charge adapter (F) to charger.
∙ Connect the charger to the EnergyPak. It only
fits in one orientation.
∙ Connect the charger to an AC outlet.
∙ Charging operation can be discontinued at any
given time.
∙ Disconnect the charger first from the outlet
and then from the EnergyPak.
Installing the EnergyPak.
∙ Reverse removal procedure to install the
EnergyPak.
∙ Make sure the slots are aligned correctly at the
bottom.
∙ Push the top of the EnergyPak and make sure
the EnergyPak is secured properly. A 'click'
can be noticed while doing so.
∙ Pull out the key.
∙ The bike is ready for usage.
EnergyPak (side release)
∙ Insert the key and unlock the EnergyPak.
∙ Slide the top of the EnergyPak battery
sideways to the left.
∙ Lift out the EnergyPak.
∙ Connect the charger to the EnergyPak.
∙ Connect the charger to an AC outlet.
∙ Charging operation can be discontinued at any
given time.
∙ Disconnect the charger first from the outlet
and then from the EnergyPak.
10
1
2
3
F
2
1
3