Disassembly Of Actuator From Valve Body; Disassembly Of Actuator Top - Gemü 532 SKV Originalmontageanleitung

5 Disassembly
5.1 Disassembly of actuator from
valve body
a
4
Important:
+
After disassembly, clean all parts
of contamination (do not damage
parts). Check parts for potential
damage, replace if necessary (only
use genuine parts from GEMÜ).
1. Disconnect the actuator A from control
medium lines.
2. Undo the union nut a.
3. Remove actuator A from valve body 1.
4. Remove gasket 4.
532 SKV
5.2

Disassembly of actuator top

1. Remove actuator A (see chapter 5.1
"Disassembly of actuator from valve
body").
2. Undo and remove the connecting
bolts 23 between the actuator top 10
and actuator base 25.
A
3. Remove actuator top 10.
1
4. Undo and remove the hexagon nut 11
from the spindle 2.
+
16 / 24
The compression spring is
slightly pretensioned.
10
25
23
10
11
2