Herunterladen Inhalt Inhalt Diese Seite drucken

Information About Scrapping; Environmental Information - Corghi ARTIGLIO UNIFORMITY Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

The purpose of the regulator filter unit plus lubricator (FRL) is to filter the air, adjust the
pressure and lubricate it.
The FRL unit has a maximum input pressure of 18 bar and has an output delivery range
adjustable from 0.5 to 10 bar. Pull and turn the handle to change the setting. After adjust-
ing, return the handle to the locked position by pushing down (fig.63a).
The lubricant flow-rate is adjusted by turning the screw on part "L", (fig.63b); normally
this unit is precalibrated to a pressure of 10Bar, with SAE20 viscosity lubricant in order
to make a drop of lubricant come out, which can be seen from the specific cover, every
4 times the bead breaker is operated.
Periodically check the lubricant level through the specific windows and top up as shown
in fig.63c. Top up only with non-detergent SAE20 oil equal to 50cc.
The FR filter-regulator is equipped with an automatic condensate drain and does not
require any special maintenance in normal operating conditions. The condensate may
however be drained manually at any time (fig.63d).
Normally the cups do not need to be removed, but check if this is necessary for mainte-
nance operations after a long period of use. If a manual operation is not sufficient, use
the specific key provided (fig.63e).
Clean with a dry cloth. Avoid contact with solvents.
keep the working area clean.
Never use compressed air, water jets or solvents to remove dirt or deposits from the
machine. When cleaning the area, take steps to avoid building up and raising dust as
far as possible.

11. INFORMATION ABOUT SCRAPPING

If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts
and dispose of them separately in accordance with current provisions as prescribed by law.

12. ENVIRONMENTAL INFORMATION

The following disposal procedure must be applied to the machines having the crossed-out
bin symbol on their data plate
This product may contain substances that can be hazardous to the environment and to
human health if it is not disposed of properly.
The following information is therefore provided to prevent the release of these substances
and to improve the use of natural resources.
Electrical and electronic equipment must never be disposed of in the usual municipal
waste but must be separately collected for their proper treatment.
Artiglio Uniformity User Manual
CAUTION!
.
EN
169

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis