Corghi ARTIGLIO UNIFORMITY Betriebsanleitung Seite 138

do not approach the tyre horizontally with the arm - as the upper arm approaches
the tyre, so does the lower arm.
Lower bead breaking (fig. 34)
A - Preload the bead breaker disc with the control
(Fig. 34) (a preload compressing the tyre by
approximately 5 mm is recommended).
B - Activate disc penetration with control
34), then start wheel rotation (using the pedal
lowing the bead breaker in small steps by tapping the control
C
C- Perform at least one full turn to break the bead.
The rim bead should be greased during the spin.
D - Lower the bead breaker unit to its initial position. This action also rearms bead breaker
disc penetration (Fig. 35).
138
CAUTION!
(Fig.
B
A
, Fig. 33) while simultaneously
(Fig. 34).
B
A
Artiglio Uniformity User Manual
B
33
34