Main Components - AERMEC FCL 32 Installationshandbuch

MAIN COMPONENTS

1 Grid with air filter
2 Receiver (GLL_M; GLL_R; GLF10)
3 Air flow deflector
4 Grid frame
5 Tray
FCL (Modulo 600)
GLL 10M
GLL 10R
11
12
13
FCL (Module 840)
GLL 20R
13
14
DESCRIPTION
The FCL cassette type fan coil is a termi-
nal for conditioning air in a room. The
FCL concentrates high technological and
functional features that make it the ideal
means for air conditioning for all envi-
ronments. The supply of conditioned air
is distributed throughout the room; FCL
generates heat if included in a heating
system with boiler or heat pump but may
also be used in the summer as an air con-
ditioner if the heating system has a water
chiller.
The fan coils are designed for 2 and 4 pipe
systems (in the versions with hot water
coil).
The unit is mounted in a suspended-ceil-
22
IFCLIJ 1805 - 4528500_09
6 Base
7 Fixing brackets
8 Electric box
9 Hydraulic attachments (for 4 pipes only)
10 Hydraulic attachments (2 pipes)
10 9
8
7
6
5
2
1 3 4
12
ing with the possibility of sending condi-
tioned air to adjacent rooms and intro-
ducing external air independently from
unit ventilation.
The FCL units are available in two funda-
mental dimensions, which will be called:
"Module 600" for units that can be inte-
grated in the standard 600x600mm sus-
pended ceiling panelling.
"Module 840" for more powerful versions,
dimensioned to be housed in a compart-
ment measuring 840x840mm.
BASE
The support base is in deep-drawn galva-
nised sheet steel,. The following are fixed
14
12
13
9 8
10 11
11 Air vent valve
12 Semi-sliced, fitting for air flow to an
adjacent room
13 Condensate drain
14 Remote control (GLL_M; GLL_R; GLF10)
FCL (Modulo 600)
GLF10
9 8
11 10
1 2 3
7
2
1 3
to the base: fixing brackets, coils, motor
and fan, condensate draining pump,
attachment plates, terminal board unit
and condensate drip tray. Using the rel-
evant flange (accessory) it allows to con-
nect the ducts to the sides for fresh air to
the room and/or for flow to an adjacent
room.
The units with "Module 600" are built with
a reinforced support structure with lat-
eral strip in galvanised sheet steel and
heat insulated with internal elements
in expanded polystyrene insulation ele-
ments obtained from injection moulding
with the functions of noise reduction and
conveying air.
7
6
4
4
6
5
4