General - Honeywell IDENT-KEY 3 Montage, Anschluss, Anleitung

Mounting and Connection Instructions IK3 Operating Unit with Keypad
2.

General

The IDENT-KEY operating units serve as switching elements for arming/disarming intrusion
detection systems as well as for AC functions. They are used in conjunction with an
unit BUS-2 (023312.10) or an
data carriers.
Additional functions (e.g. switching and control functions) that can be activated via the operating
unit keypad can be defined in the programming of the central control unit/evaluation unit.
Important!
The functionality of the operating units differs somewhat when used at the EU BUS-2 or the
EU Conventional.
Please observe the relevant information in this manual.
VdS-compliant installation consists of the combination: MB control panel, IK3 evaluation
unit BUS-2 and IK3 operating unit Accentic in the changing transmission data mode.
Performance features
- Clear and logical operating concept
- Simple start-up, no bus collision
- Simple address allocation without switches (no possibility of allocating addresses twice).
- RS-485 interface with transmission ranges to max. 1200 m.
- Firmware update via BUS-2 or via EU
- The operating unit is completely protected against humidity.
- For use outdoors and indoors at temperatures from -25°C to +55°C.
- Simple assembly with two or three screws
- The operating unit can be directly mounted on commercially available f.m. sockets.
- The front of the housing is replaceable (in different colours).
- BSI-approval in conjunction with the housing base with tamper contact Item no. 023324.
Special keypad features:
- Neutral labelling of LEDs and keypad
- Abrasion-resistant 10 key keypad with 6 additional functional keys.
- Tactile and acoustical acknowledgement.
- Up to 100 programmable macro functions (in conjunction with EU BUS-2).
- Up to 16 switching and control functions (in conjunction with EU conventional)
- Night design with time-limited luminous background
Special reader features:
- New evaluation process ensures extremely stable transmission.
- Automatic identification of different transponder types.
- Semi-automatic range adaptation is possible on virtually all mounting surfaces, also on metal.
- Transmission range can be set within specific limits.
- Extremely high security due to changing transmission data when using write/read transponders.
- Synchronization of max. 4 operating units installed close to one another.
- Low current consumption (on average <11 mA ).
IK3 evaluation unit conventional
IK3 evaluation
(023310) and the corresponding
17