Fcc Statements - Honeywell IDENT-KEY 3 Montage, Anschluss, Anleitung

28
10.

FCC Statements

The devices can contain the transmitter modules:
reader module IC:6587A-X0400600 / FCC ID: UA2X0400600
10.1 Statement required by 15.19 and RSS-210
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
10.2 Statement required by 15.21
Warning:
11.3 Statement required by 15.105
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Honeywell Commercial Security
Novar GmbH
Johannes-Mauthe-Straße 14
D-72458 Albstadt
www.honeywell.com/security/de
Mounting and Connection Instructions IK3 Operating Unit with Keypad
Changes or modifications made to this equipment not
expressly approved by Honeywell may void the FCC
authorization to operate this equipment.
P00652-10-002-12
2017-06-28
© 2017 Novar GmbH