Select a brush head:
¾
Domed brush head
Suitable for:
Use example:
Flat brush head
Suitable for:
Use example:
Conical brush head
Suitable for:
Use example:
Turn the brush head until it fits on the brush
¾
axle 4 and push it .
Remove the brush head: Pull the brush head
¾
from the brush axle 4 .
Operation
m
ATTENTION! Do not use abrasive cleaning
agents . They could irreparably damage the
surface you are cleaning .
Hold the product close to the surface .
¾
Switching on: Press
¾
Guide the brush head 11 / 12 / 13 over the
¾
surface in circular motions, applying gentle
pressure .
Switching off: Press
¾
42
GB/MT
11
Cleaning uneven
surfaces
Sinks and fittings
12
Cleaning large, even
surfaces
Floors and walls
13
Cleaning spots that are
difficult to access
Corners and joints
6 .
6 .
Changing the angle
(see fig . E)
Bend: Press and hold
¾
part of the product in a clockwise direction
until
5 locks into place .
Straighten: Press and hold
¾
upper part of the product in an anti-clockwise
direction until
5 locks into place .
Cleaning and care
m
WARNING! Risk of injury! Switch off
the product and disconnect it from the power
supply before cleaning .
m
WARNING! Risk of electric shock!
Do not immerse the product's electrical
components in water or other liquids . Never
hold the product under running water .
m
ATTENTION! Always keep the lid 8 closed
when the product is not charging .
Clean product with a damp cloth . For
¾
stubborn dirt, add a little mild detergent to the
cloth .
The brush heads 11 / 12 / 13 can be
¾
cleaned in water with a mild detergent .
Allow all components to dry before reusing or
¾
storing them .
Storage
Store the product in the original packaging
¾
when it is not in use .
Store the product at a dry location out of the
¾
reach of children .
The rechargeable battery in the product
¾
should be charged for at least 90 minutes
every 3 months .
5 . Turn the upper
5 . Turn the