Starting-Up; Pan Detection; Residual Heat Indication; Booster Function - BORETTI BIKP-90 Bedienungsanleitung

Starting-up

• Start up / switch off the hob:
Action
To start
To stop
• Start up / switch off a heating zone:
Action
To set (adjust the power)
To stop
If no action is made within 20 second the electronics returns in waiting position.

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case
it is impossible to increase the power and the display shows [ U ]. This symbol disappears when
a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows [ U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking continues
with the power level set before.
After use, switch the heat element off : don't let the pan detection [ U ] active.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.

Booster function

The Booster function [ P ] and the Double Booster [
lected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high Booster.
Booster is foreseen for example to heat up rapidly big quantities of water, like nuddles.
Control panel
press key [0/I]
press key [0/I]
Control panel
slide on the "SLIDER"
to the right or to the left
slide to [ 0 ] on "SLIDER"
Display
[ 0 ]
nothing or [ H ]
Display
[ 1 ] to [ P ]
[ 0 ] or [ H ]
] grants a boost of Booster to the se-
D
EN
27