Herunterladen Inhalt Inhalt Diese Seite drucken

Use Of The Appliance; Display; Ventilation; Starting-Up And Appliance Management - BORETTI BIKP-78 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Use of the appliance

Display

Designation
0.
Zero
1...9
Booster level
U
No pan detection
A
Heat accelerator
E
Error message
H
Residual heat
P
1st Booster
2nd Booster
L
Locking
Keep warm
U
U
Keep warm
II
Stop&Go

Ventilation

The cooling system is fully automatic. The cooling fan starts with a low speed when the calories
brought out by the electronic system reach a certain level. The ventilation starts his high speed
when the hob is intensively used. The cooling fan reduces his speed and stops automatically when
the electronic circuit is cooled enough.

Starting-up and appliance management

Before the first use

Clean your hob with a damp cloth, and then dry
the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the
glass surface.

Induction principle

An induction coil is located under each hea-
ting zone. When it is engaged, it produces a
variable electromagnetic field which produces
inductive currents in the ferromagnetic bottom
plate of the pan. The result is a heating-up of
the pan located on the heating zone.
Description
The heating zone is activated.
Selection of the cooking level.
No pan or inadequate pan.
Automatic cooking.
Electronic failure.
The heating zone is hot.
The 1st Booster is activated.
The 2nd Booster is activated.
Control panel locking.
Maintain automatically of 42°C.
Maintain automatically of 70°C.
The hob is in pause.
Of course the pan has to be adapted:
• All ferromagnetic pans are recommended
(please verify it thanks a little magnet):
cast iron and steel pans, enamelled pans,
stainless-steel pans with ferromagnetic
bottoms...
• Are excluded: cupper, pure stainless-steel,
aluminium, glass, wood, ceramic, stone-
ware...
The induction heating zone adapts automatical-
ly the size of the pan. With a too small diame-
ter the pan doesn't work. This diameter is va-
rying in function of the heating zone diameter.
If the pan is not adapted to the induction hob
the display will show [ U ].
D
EN
25

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis