ENGLISH
• if you did not remove the core
temperature sensor plug from the socket.
• if you did not fully close the oven door.
Remove the worst dirt manually.
Caution! If there are other
appliances installed in the same
cabinet, do not use them at the
same time as the function:
Pyrolysis. It can cause damage to
the appliance.
1. Clean the inner side of the door with hot
water, so that the residues do not burn
from the hot air.
2. Activate the appliance and select from
the main menu the function: Pyrolysis.
Press
to confirm.
3. Set the duration of the cleaning
procedure:
Option
Quick
Normal
Intense
4. Touch
to confirm.
When the pyrolytic cleaning
starts, the appliance door is
locked.
To stop the pyrolytic cleaning
before it is completed, deactivate
the appliance.
Warning! After the function is
completed, the appliance is very
hot. Let it cool down. There is a
risk of burns.
Description
1 h for a low
degree of dirt
1 h 30 min for
a usual de-
gree of dirt
2 h 30 min for
a high degree
of dirt
After the function is completed,
the door stays locked for the cool
down phase. Some of the
appliance functions are not
available during the cool down
phase.
Cleaning the oven door
The oven door has four glass panels. You
can remove the oven door and the internal
glass panels to clean them.
The oven door can close if you
try to remove the glass panels
before you remove the oven
door.
Caution! Do not use the
appliance without the glass
panels.
1
Open the door fully
and hold the two
door hinges.
24
2
Lift and turn the
levers on the two
hinges.