IFM Electronic ecomot mobile R 360 Serie Starterset-Handbuch Seite 196

A small ecolog CoDeSys project as a start
When the correct option is activated ('Project' 'Options' 'Ask for Project Info')
is activated, a dialogue box for project information is shown automatically before
saving (Figure 80).
Figure 80: Project Information
You can fill it in (or leave it).
We strongly recommend to make abundant use of the various possibilities to
document the project.
Your complete project including the visualisation is now saved in the file
Easyand.pro!
A simple 'Save' instead of 'Save as...' would have been sufficient. We have
described the process in detail in case that, in the heat of the work, you have
forgotten to save before (see Figure 53).
But now it's time for a break and we will leave the programming system for the
time being.
For this purpose stop the program ('Online' 'Stop') (
('Online' 'Logout'). Then use the option 'File' 'Exit' or the key combination
<ALT>+<F4 to close the CoDeSys program.
We hope that this quick introduction has given you a little overview of CoDeSys
making you curious to find out more about the other possibilities of the system.
The following chapters will consolidate your knowledge and very quickly turn
you into a CoDeSys expert!
3-30
page 3-19, then log out