Mounting Depth Wheel - Stihl FSE 60 Gebrauchsanleitung

2
1
The blade (1) on the deflector (2) trims
surplus line to the correct length – avoid
tapping the mowing head more than
once at a time.
Line feed operates only if both lines still
have a minimum length of 2.5 cm.
If the line is shorter than 2.5 cm:
Switch off the trimmer.
N
Disconnect the plug from the power
N
supply.
Turn the trimmer on its back.
N
Press down the cap on the spool as
N
far as stop.
Pull the ends of the lines out of the
N
spool.
If the spool is empty, see "Replacing
Nylon Line".
FSE 60, FSE 71, FSE 81
Removing the mowing head
STIHL AutoCut
Hold the mowing head steady.
N
Unscrew the cap counterclockwise.
N
Replacing nylon line
STIHL AutoCut
See chapter on "Replacing Nylon Line".

Mounting Depth Wheel

The depth wheel is included in the scope
of supply or is available as a special
accessory.
It limits the working range of the mowing
line.
It helps reduce the risk of the
–
rotating mowing line causing
damage (e.g. tree bark).
It maintains the correct ground
–
clearance when edging.
2
B
C A
3
1
The depth wheel (1) can be locked in
three different positions (A, B or C) on
the support (2). This allows the reach of
the mowing line to be varied.
A Working range of mowing line
extends beyond the outside
diameter of the depth wheel, e.g. for
lawn edging.
B Working range of mowing line
extends up to outside diameter of
depth wheel.
C Working range of mowing line does
not reach as far as outside diameter
of depth wheel, e.g. for mowing
around trees.
English
39