Mounting The Deflector; Mounting The Cutting Attachment - Stihl FSE 60 Gebrauchsanleitung

Mounting the Deflector

2
1
Push the deflector (1) over the
N
clamp (2) as far as stop.
4
Fit the locknut (3) in the hex recess
N
on the deflector.
Make sure the holes line up.
N
Insert the M6x30 screw (4) and
N
tighten it down firmly.
FSE 60, FSE 71, FSE 81
Mounting the Cutting
Attachment
Preparations
3
Switch off the power tool.
N
Put your power tool on the ground:
N
Loop handle pointing down and the
output shaft facing up.
Mounting STIHL AutoCut C 5 - 2 Mowing
Head
1
3
2
4
Slip the mowing head (1) over the
N
shaft (2) and engage hex recess (3)
on the external hexagon (4).
English
37