Setting The Date And Time - Ariete 2712/1 Bedienungsanleitung

USING THE RObOT WHERE THERE IS A GOOD DEAL OF
EXPOSURE TO SUNLIGHT
When using the robot in rooms with a great deal of exposure to sunlight, we recommend closing blinds
or curtains to reduce this and to remove the problems that could incorrectly change the direction and
route of the appliance.
DAILY CLEANING PROGRAMMING
the starting time of the daily cleaning cycle,
which can be different up to 7 days, can be
set through the remote control.
Install first the two batteries (type AAA or
R03) into the apposite housing situated on
the rear side of the remote control, after
having raised the related lid. to close the lid,
after having inserted a side into the opening,
mount the other end by pressing it.
to program the operating time, set the clock first.

SETTING THE DATE AND TIME

the current hour and date setting is carried out only through the touch screen on the Robot:
- Hold down the "PLAN" button for 3 seconds to enter the clock setting mode.
- Press the "SPot" and "HoME" buttons together to set the hours: then press "PLAN" to confirm and
pass on to the minutes.
- Press the "SPot" and "HoME" buttons together to set the minutes, then press "CLEAN" to confirm
and pass onto setting the day.
- Press the "SPot" and "HoME" buttons together to set the day, from the number "1" which represents
Monday, through to "7", which is Sunday.
- Press "CLEAN" to exit and quit.
- to delete the time, set it to 00:00 and save.
SETTING THE CLEANING PROGRAMME
1) Through the control panel (B) on the appliance body:
- Press the "CLEAN" button to set the Robot to "pause".
- Press the "PLAN" button to enter the programming mode.
- Press the "SPot" and "HoME" buttons together to set the day, from the number "1" which represents
Monday, through to "7", which is Sunday.
- Press "CLEAN" to confirm and quit or "PLAN" to set the time for daily cleaning.
- Press the "SPot" and "HoME" buttons together to set the hours: then press "PLAN" to confirm and
pass on to the minutes or press "CLEAN" to confirm and return to the days setting.
- Press the "SPot" and "HoME" buttons together to set the minutes, then press "CLEAN" to confirm
and quit, returning to days, or press "PLAN" to confirm and return to the hours.
- to cancel the cleaning program, keep the "PLAN" button pressed for 5 seconds in programming
mode.
- 37 -
EN