Switching Lighting On / Off; Setting The Time - Truma CP plus Gebrauchsanweisung

Selecting the fan level
The "Select fan level" menu is available only if a room
temperature of 5° C or higher is set. Not available with
automatic climate control AUTO. For more information refer
to "Selecting the fan level" on page 27
– Select desired fan level with rotary push button.
– Tap the rotary push button to confirm the value.
Activating the time switch (ON)
– Activate time switch with rotary push button (ON).
– Tap the rotary push button to confirm the value.
hot
– The time switch remains active until it is deactivated
(OFF), even for several days.
– If the time switch is programmed and active, the time
switch icon flashes.
Deactivating the time switch (OFF)
– Change to the setting level by tapping on the rotary push
button.
– Deactivate time switch with rotary push button (OFF).
– Tap the rotary push button to confirm the value.
30 EN
2
hot

Switching lighting on / off

Available with air distributors with ambient lighting for
Truma air conditioning systems.
– Select icon in menu bar (4) with rotary push button.
– Change to the setting level by tapping on the rotary push
button.
– Select required function with rotary push button.
1 – 5 – Switch lighting on.
Brightness can be selected in 5 levels.
OFF – Switch lighting off.
– Tap the rotary push button to confirm the value.
4

Setting the time

Display, 24 h mode
hot
4
Display, 12 h mode
hot
4
= a. m.
= p. m.