Changing The Hot Water Level; Selecting The Energy Type - Truma CP plus Gebrauchsanweisung

Automatic climate control (AUTO)
Adjustable temperature range 18 – 25 °C (1 °C increments)
Automatic changeover between heater and air conditioning
system for an approximately constant temperature inside the
vehicle.
f = AUTO – Automatic climate control is activated
Requirements for operation with automatic climate control:
– The heater and air conditioning system must be connected.
– Automatic climate control "ACC" must be activated in the
service menu (see "Service menu" on page 31).

Changing the hot water level

Select icon in menu bar (3) with rotary push button.
– Change to the setting level by tapping on the rotary push
button.
– Select desired level with rotary push button.
– Tap the rotary push button to confirm the value.
2
3
26 EN
a b c
– = OFF – Hot water generator is switched off.
a = eco* – Hot water temperature 40 °C
b = hot – Hot water temperature 60 °C
c = boost – Targeted, rapid heating of water (water pri-
ority) for maximum 40 minutes. When the
water temperature is reached, room heating
continues.
* Hot water temperature may exceed 40 °C with combined room and
water heating. Not available for the Australian variants.
This symbol flashes until the required water temperature has been
reached.

Selecting the energy type

The select energy type menu is displayed only if a heater
with electric heating elements is connected.
– Select icon in menu bar (3) with rotary push button.
– Change to the setting level by tapping on the rotary push
button.
– Select desired energy type with rotary push button.
– Tap the rotary push button to confirm the value.
a b
2
c d e
3