NEC NC1000C Installationsanleitung Seite 89

Error Code
267 Fan13 Stop Precaution
268 Fan14 Stop Precaution
271 IMB:SD Tamper Terminate
301 System Error
302 Self Test Error
305 Key Error
306 Certificate Error
329 FMT Sequence Data File Mismatch
330 FMT DMD Data File Mismatch
333 Satellite Hardware Mismatch
335 Red Satellite Reports Reset
336 Red Satellite Serial Link Error
337 Red Satellite Firmware Configuration Error
338 Red DAD1000 Bias Under Voltage Error
339 Red DAD1000 Reset Under Voltage Error
340 Red DAD1000 Offset Under Voltage Error
341 Red DAD1000 Thermal Shutdown Error
342 Green Satellite Reports Reset
343 Green Satellite Serial Link Error
344 Green Satellite Firmware Configuration Error
345 Green DAD1000 Bias Under Voltage Error
346 Green DAD1000 Reset Under Voltage Error
347 Green DAD1000 Offset Under Voltage Error
348 Green DAD1000 Thermal Shutdown Error
349 Blue Satellite Reports Reset
350 Blue Satellite Serial Link Error
351 Blue Satellite Firmware Configuration Error
352 Blue DAD1000 Bias Under Voltage Error
353 Blue DAD1000 Reset Under Voltage Error
354 Blue DAD1000 Offset Under Voltage Error
355 Blue DAD1000 Thermal Shutdown Error
370 ICP Frame Memory Test Result Fail
372 ICP Data Path Signature Test Result Fail
380 DRS Error(Low Battery)
381 SEC No Battery
500 IMB Comm Fail
510 IMB:System Error
511 IMB:Self Test Error
519 IMB:Certificate or Key Error
520 IMB:ICP Communications Status
537 IMB:RTC Error
543 IMB:FPGA Temperature out of range
550 IMB:Supply voltage out of range
Error message Description
Fan13 Stop Precaution
Fan14 Stop Precaution
Terminated service door tamper event latched by IMB.
* This message would be shown on Log, not on LCD.
ICP status error
ICP status error
ICP status error
ICP status error
ICP status error
ICP status error
ICP status error
FSB status error
ICP or FSB status error
ICP or FSB status error
FSB status error
FSB status error
FSB status error
FSB status error
FSB status error
ICP or FSB status error
ICP or FSB status error
FSB status error
FSB status error
FSB status error
FSB status error
FSB status error
ICP or FSB status error
ICP or FSB status error
FSB status error
FSB status error
FSB status error
FSB status error
ICP self test error due to "Frame memory error"
ICP self test error due to "Data Path Signature Test Result
Fail"
FMT board low battery
* When this error has occurred, IMB can not Marriage with
the projector.
* After this error has occurred, Integrity Error will occur when
you turn on the power again.
No communication with the secure processor.
* When this error has occurred, IMB can not Marriage with
the projector.
* After this error has occurred, Integrity Error may occur
when you turn on the power again.
No communication with the IMB.
IMB Status error
IMB Status error
IMB Status error
IMB fails to do logical marriage to projector.
IMB RTC is "invalid".
IMB Status error
IMB Status error
Appendix
89