MIRKA AROP-B 312NV Bedienungsanleitung Seite 253

Declaration of conformity
Mirka Ltd., 66850 Jeppo, Finland
declares under its sole responsibility that the Mirka® AROP-B & ARP-B 77 mm (3") Electrical Polishers (see the
"Technical data" table for the particular model) conform with the following standards or other normative
documents: EN 62841-1:2015, EN 60745-1:2009, EN 60745-2-3:2011/A13:2015, EN 62841-2-4:2014 in accordance
with the regulations 2006/42/EC, 2014/30/ EU, 2015/863/EU Charger safety specification according to EN 60335-
1:2012/ A13:2017, EN 60335-2-29:2004/A2:2010, EN 62233:2008 Charger EMC according to EN 55014-1:2017,
EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013
Jeppo, September 25, 2019
Place and date of issue
Operating instructions include: Exploded view,
Parts list, Declaration of conformity, Required
personal safety equipment, Warning, Caution, Safety
rules, Safety warnings, Safety instructions, Technical
data, Noise and vibration information, Proper use of
tool, Battery and charger, Getting started, Operating
instructions, Maintenance, Further service,
Troubleshooting guide, Disposal information
Translation of the original instructions We reserve the right to make changes to this manual without prior notice
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool Keep these
instructions in a safe and accessible place
Required personal safety equipment
Read
operator's manual
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from:
Superintendent of Documents; Government Printing Office; Washington DC 20402
• State and local regulations
Mirka® AROP-B 77 mm (3") Electrical Polisher
CONFORMS TO UL STD 62841-1, 62841-2-4
CERTIFIED TO CSA STD C22 2 No 62841-1, C22 2 No 62841-2-4
Mirka® ARP-B 77 mm (3") Electrical Polisher
CONFORMS TO UL STD 60745-1, 60745-2-3,
CERTIFIED TO CSA STD C22 2 No 60745-1, C22 2 No 60745-2-3
Wear
safety glasses ear protection
Company
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Phone +358 20 760 2111
Fax +358 20 760 2290
www mirka com
Wear
safety gloves
Mirka® AROP-B 312NV & ARP-B 300NV • 77 mm (3") • 10.8 V
Stefan Sjöberg, CEO
Wear Wear
face mask
en | us • ca
253