Setting Of The Chain-Off Thread Rolling-In Function - JUKI MO-6000 series Betriebsanleitung

2. Setting of the chain-off thread rolling-in function

1
2
16
Changeover to the function setting mode
[Changeover to the service mode]
1) Turn OFF the power.
Pressing switch 4, turn ON the power.
2)
3) The screen is displayed. Continue pressing
switch 4 for three seconds.
4) When the second buzzer beeps, the changeover
to the service mode is completed.
4
The display of the screen is as shown in the figure.
(Same as the users' mode)
5) Call the chain-off thread rolling-in function.
Press switch 1 or 2 to display the figure (No.65).