Various Settings Of The Chain-Off Thread Rolling-In Sewing - JUKI MO-6000 series Betriebsanleitung

4. Various settings of the chain-off thread rolling-in sewing

The respective functions are set to the standard commendable values by setting of 1 through 3. However,
the values can be changed in accordance with the sewing conditions. The change can be performed with
" users' mode " or " normal mode " . Typical setting item and set value as the chain-off thread rolling-in
function are described in the list below.
Setting item
Max sewing speed [sti/
min]
MO.1
MO.2
Number of stitches of
soft start [Stitch]
Sewing speed for soft
start [sti/min]
MO.1
MO.2
Chain-off thread sewing
speed at the end of sew-
ing [sti/min]
MO.1
MO.2
Number of stitches of
thread tension release at
t h e s t a r t o f s e w i n g
[Stitch]
Number of stitches from
detection of material end
sensor at the end of sew-
ing to thread tension re-
lease [Stitch]
Number of stitches of
chain-off thread sewing
[Stitch]
* For other setting, refer to the Instruction Manual for SC-921 and the Engineer's Manual for SC-921.
8
Standard value Setting range Change mode Program No.
150 to 5500
4000
150 to 8000
7000
0 to 19
4
250
100 to MAX.
2000
2500
150 to MAX
3000
1 0 to 100
4 0 to 100
0 to 100
40
96
1
Users' mode
37
38
U1 1
Normal mode
U1 2
U1 3
Remarks
Max. value is
that of No. 96.
Max. value is
that of No. 96.
Refer to p.8.
Refer to p.8.
Length of chain-
off thread is ad-
justed.