Contents Of The Delivery; Description - bürkert 8026 Kurzanleitung

NOTE
Elements / Components sensitive to electrostatic discharges
• This device contains electronic components sensitive to electro-
static discharges. They may be damaged if they are touched by
an electrostatically charged person or object. In the worst case
scenario, these components are instantly destroyed or go out of
order as soon as they are activated.
• To minimise or even avoid all damage due to an electrostatic dis-
charge, take all the precautions described in the EN 100 015-1
norm.
• Also ensure that you do not touch any of the live electrical com-
ponents.
This device was developed with due consideration given to
accepted safety rules and is state-of-the-art. However, risks
may arise.
Failure to observe these instructions as well as any unauthorised
work on the device excludes us from any liability and also nullifies
the warranty which covers the device and its accessories.
6 english
Type 8026 - 8036 - 8076

Contents of the delivery

5. CONTENTS OF THE DELIVERY
When you receive the merchandise, make sure that the contents of
the delivery have not been damaged in any way and ensure that they
correspond exactly with the delivery note or packing list. If this is not
the case, contact your retailer immediately.
The addresses of our international branches can be found on the
Internet under:
www.burkert.com Bürkert
6.

DESCRIPTION

The flow rate transmitters 8026, 8036 and 8076 comprise:
• a flow rate sensor, either:
- the measuring finger of a 8026
- or the S030 fitting of an 8036
- or the S070 fitting of an 8076
• an acquisition / conversion module for the physical parameters
measured, either:
- the electronic module of a 8026
- or the SE36 electronic module of a transmitter 8036 or 8076
• a display module with browse button used to read and/or config-
ure the parameters of the device. The display module is available
as an accessory.
Company Locations