SilverCrest USB 2.0 Video Grabber SVG 2.0 A3
Congratulations!
By purchasing the SilverCrest USB 2.0 video grabber SVG 2.0 A3, hereinafter referred to as video
grabber, you have opted for a high-quality, durable product.
The video grabber enables analogue information, e.g. video camera recordings, to be digitized and
then saved on a computer.
These operating instructions contain important information on the safe use of the video grabber, as
well as instructions and information on its daily use and disposal. Read these operating instructions
thoroughly before using the video grabber and use it only for the purposes described in the
applicable range of applications. If you sell or pass on the video grabber to someone else, be sure to
always include these operating instructions. They are an integral part of the product.
Intended use
The SilverCrest USB 2.0 Video Grabber SVG 2.0 A3 is an information technology device. It changes
analogue information, for example, from a camcorder, into digital information that can be saved on a
PC and processed. The device may only be used with a USB 2.0 or USB 3.0 connection. The USB
1.1 standard is not supported. The device must not be connected to USB 1.1.
It is only designed for private use and not for industrial or commercial purposes. This product is not
designed for medical, life-saving or life-sustaining applications. Furthermore, the device may not be
used outdoors or in tropical climates. This device complies with all standards and directives specified
in the Declaration of Conformity. In the event of any modification to the device that was not approved
by the manufacturer, compliance with these standards is no longer guaranteed. Only use accessories
specified by the manufacturer.
Please observe the regulations and laws in the country of use.
Trademarks
Microsoft Windows is a registered trademark of Microsoft Corporation, USA.
Intel and Pentium are registered trademarks of Intel Corporation, USA.
AMD and AMD Athlon are registered trademarks of Advanced Micro Devices, Inc.
USB is a registered trademark of USB Implementers Forum, INC.
Macrovision is a trademark of the Macrovision Corporation, USA.
Other names and products may be the trademarks or registered trademarks of their respective
owners.
English - 3