Clean off transmission
Do not allow dirt, water or other debris to enter the
transmission. Even a small amount of dirt can
damage the transmission.
Service interval: Yearly, more often with frequent
cutting
1. Turn off the PTO, engage the parking brake, turn off
the ignition, and remove the key. Wait for all moving
parts
to stop.
2. Remove the mower deck (see "Mower deck removal").
3. Slide the mower discharge tube out through the
bottom of the tractor.
4. Open the catcher cover (A) to access the top of the
transmission through the discharge opening (B). If
desired, remove the catcher assembly.
5. Using water and a scrub brush, clean off the
transmission. DO NOT use a pressure washer
because you might introduce water into the
transmission.
E- 10
A
B