Viking MT 880 Gebrauchsanleitung Seite 49

A
Mower deck installation
The muffler and surrounding areas may be hot.
1. Park tractor on a hard, level surface such as a
concrete floor. Move the PTO switch (B) and ignition
switch (E) to the off position, remove the key,
depress the brake pedal (D), and apply parking
brake (C).
2. If not already done, orient the discharge tube (G) as
shown and insert it up through the middle of the
tractor.
3. Place cutting height adjust (F) in the lowest cutting
position. Place the mower deck lift lever (A) in the
lowered position also. Slide mower deck under the right
side of tractor so that mower deck hitch is aligned with
front tractor hitch.
B
(procedure continues)
C
D
E
F
G
D- 5