Setting The Temperature; Adjusting The Air Nozzles - Dometic FRESHJET FJ1700 Bedienungsanleitung

Operating the roof air conditioner
9.7

Setting the temperature

Cooling Mode
In the "Automatic" (
specify a temperature between 16 °C and 31 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The roof air conditioner confirms the receipt of the values with a high note.
✓ The temperature is set on the roof air conditioner.
Heating Mode (available for models with heating only)
In the "Automatic" (
between 16 °C and 31 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The roof air conditioner confirms the receipt of the values with a high note.
✓ The temperature is set on the roof air conditioner.
9.8

Adjusting the air nozzles

The air supply within the vehicle can be regulated by setting the air nozzles (fig. 5,
page 6).
➤ Chillout ADB: Turn the slats (1) in the air nozzles in the required direction using
the thumb wheel (2).
➤ ADB: Turn the slats (1) in the air nozzles independently in the required directions
using the thumb wheels (2, 3, 4). The air flow can be adjusted to the right and
left, as well as to the ceiling or the floor.
Move the central slide (3) to direct the air flow to the front or back.
34
), "Cooling" ( ), and "Dehumidifying" ( ) modes, you can
) and "Heating" ( ) modes, you can specify a temperature
Dometic FreshJet
EN