Position Of The Legs; Preparing For Use; Tips For Use; Mounting Option For Transformer - Auping K2 Typ 11 Gebrauchsanweisung

3.4 Position of the legs

Correct placement of the legs is
essential for
distribution. This means that the legs
must be placed as indicated below.
Length 190/200 cm:
Length 210/220 cm:
(K2 supporting leg sets are optional)

3.5 Preparing for use

Check that the mesh base can move
freely. Only adjust the mesh base while
it is in a horizontal position, securely
fixed to the supporting legs, or to the
supports provided within the bed
surround.
Check that the mattress is attached to
the mesh base properly.
Insert the plug into the wall socket.
The plug has a safety cut-out

3.6 Tips for use

A new mattress has a certain amount
of rigidity, which will disappear within a
GB6
a correct weight
Head (H)
Foot (F)
H 20 cm F 20 cm
H 30 cm F 30 cm
few days. Consequently, your mat-
tress will not optimally follow the
contours of the mesh base when it is
initially adjusted.
recommend that you lie down on the
mattress while adjusting the positions
for the first time.

3.7 Mounting option for transformer

A mounting plate is clicked to the back
of the transformer. If you wish, this
can be used to fix the transformer, for
instance to the wall.
1. Slide the mounting plate A off the
transformer.
2. Screw the plate to the wall with the
spring-mounted clip B pointing
downwards.
3. Slide the transformer, with the
mains connection on the left, over
the mounting plate.
Important!
Be sure to remove the transformer
from the mounting plate before
moving the bed.
We therefore
fig. 6