Warranty Conditions - Migatronic Delta 200 DC HP PFC Betriebsanleitung

WARRANTY CONDITIONS

Migatronic welding machines are quality-tested
continuously throughout the production process
and undergo a thorough, quality-assured final
function test as assembled units.
The warranty period is 12 months for new
welding machines if no registration is carried out.
Upon registration of new welding machines within
6 weeks from invoicing, the warranty period is
extended to 24 months.
Registration must be made on the online
address: www.migatronic.com/warranty. The
certificate of registry is proof of the registration
and will be sent by e-mail. The original invoice
and the certificate of registry will document to the
buyer that the welding machine falls within the
scope of a 24 months warranty period.
If registration is not made, the standard warranty
period is 12 months for new welding machines,
as from the date of invoicing to end user. The
original invoice is documentation for the warranty
period.
Migatronic provides warranty according to the
warranty conditions in force through remedying
defects in the welding machines that can be
proved to be caused by improper materials or
workmanship in the warranty period.
As a main rule, warranty is not provided for
welding hoses as they are considered to be wear
parts; defects that occur within 6 weeks after
putting into operation and which are caused by
improper materials or workmanship will, however,
be considered warranty claims.
All forms of transport in connection with a
warranty claim fall outside the scope of
Migatronic's warranty and will take place for
buyer's own account and risk.
We refer to Migatronic's warranty conditions at
www.migatronic.com/warranty
20