Warranty Conditions - Migatronic FOCUS STICK 160 E PFC Betriebsanleitung

Garantibetingelser
Migatronic svejsemaskiner kvalitetskontrolleres
løbende i hele produktionsforløbet og afprøves
som samlede enheder gennem omhyggelig,
kvalitetssikret funktions- og sluttest.
Migatronic yder 12 måneders garanti på nye
svejsemaskiner, der ikke er registreret.
Hvis nye svejsemaskiner registreres inden for
6 uger efter fakturering, udvides garantiperioden
til 24 måneder.
Registrering skal foretages på internetadressen:
www.migatronic.com/warranty. Som bevis for
registreringen gælder registreringsbeviset, der
fremsendes pr. e-mail. Den originale faktura samt
registreringsbeviset er købers dokumentation for,
at svejsemaskinen er omfattet af en 24 måneders
garanti.
Såfremt registrering ikke foretages, er standard
garantiperioden 12 måneder for nye svejse-
maskiner, regnet fra dato for fakturering til
slutkunde. Den originale faktura er
dokumentation for garantiperioden.
Migatronic yder garanti i henhold til gældende
garantibetingelser ved at udbedre mangler eller
fejl ved svejsemaskiner, der påviseligt inden for
garantiperioden måtte skyldes materiale- eller
produktionsfejl.
Der ydes som hovedregel ikke garanti på
svejseslanger, da disse anses som sliddele; dog
vil fejl og mangler, som opstår inden for 6 uger
efter ibrugtagning og som skyldes materiale- eller
produktionsfejl, blive betragtet som
garantireklamation.
Enhver form for transport i forbindelse med en
garantireklamation er ikke omfattet af Migatronics
garantiydelse og vil derfor ske for købers regning
og risiko.
I øvrigt henvises til Migatronic gældende
garantibetingelser som er tilgængelig på:
www.migatronic.com/warranty

Warranty conditions

Migatronic welding machines are quality-tested
continuously throughout the production process
and undergo a thorough, quality-assured final
function test as assembled units.
The warranty period is 12 months for new
welding machines if no registration is carried out.
Upon registration of new welding machines within
6 weeks from invoicing, the warranty period is
extended to 24 months.
Registration must be made on the online
address: www.migatronic.com/warranty. The
certificate of registry is proof of the registration
and will be sent by e-mail. The original invoice
and the certificate of registry will document to the
buyer that the welding machine falls within the
scope of a 24 months warranty period.
If registration is not made, the standard warranty
period is 12 months for new welding machines,
as from the date of invoicing to end user. The
original invoice is documentation for the warranty
period.
Migatronic provides warranty according to the
warranty conditions in force through remedying
defects in the welding machines that can be
proved to be caused by improper materials or
workmanship in the warranty period.
As a main rule, warranty is not provided for
welding hoses as they are considered to be wear
parts; defects that occur within 6 weeks after
putting into operation and which are caused by
improper materials or workmanship will, however,
be considered warranty claims.
All forms of transport in connection with a
warranty claim fall outside the scope of
Migatronic's warranty and will take place for
buyer's own account and risk.
We refer to Migatronic's warranty conditions at
www.migatronic.com/warranty
108