Polti Unico MCV85 TOTALCLEAN & TURBO Bedienungsanleitung Seite 33

5. MULTIBRUSH
Depending on the surface to be cleaned (rugs/carpet, parquet
and delicate floors, hard floors and tiles) and the function that
you want to use (suction, steam, steam and suction at the same
time) with or without the cloth holder, select the most suitable
position (A-B-C) based on the type of cleaning, by pressing the
appropriate pedal:
A - no insert
B - rubber inserts
C - bristle inserts
The specific label present on the appliance and shown below
indicates how best to use the Multibrush brush based on the
type of surface and cleaning function.
KEY:
SURFACES
HARD RUGS
FLOORS CARPET
CLEANING FUNCTION
VACUUM STEAM
VACUUM STEAM
During cleaning operations, we recommend the use of the cloth
when you want to wash and sanitise the floors so that the dirt
loosened by the steam is collected by the cloth.
The cloth can also be used with the combine steam / suction
function.
In particular for cleaning delicate floors, such as parquet, the
cloth ensures no damage is made to the surface being treated.
+
VACUUM STEAM STEAM & DRY
C A B
+
A A A
C A A
+ +
DELICATE
FLOORS
+
STEAM & DRY
STEAM /
DRYING
If it does not dry completely because the cloth has been soaked
by the steam, we recommend going back over the surface with
a dry cloth.
Only use the cloth and special holder with the brush in position A.
2 washable microfibre cloths are included:
MCV85: 1 cloth with bumpers for delicate floors (beige colour)
and 1 cloth with bumpers (white with red stripes) for all types
of floors.
MCV80: 1 cloth with bumpers and 1 universal cloth for hard to
reach places, both suitable for all types of floors.
6. AUTOMATIC CLEANING PROGRAMS
UNICO is equipped with pre-set programs to automatically
regulate the steam pressure and the duration of suction based
on the surface in question. The surfaces are washed and
sanitised with the steam and, when the suction is activated,
drying begins by removing the humidity left previously by the
steam.
To activate the programs, make sure that Chapter 1 and 2 have
been carried out and begin the cleaning operations. Then select
the program by pressing the PROGRAM button on the control
panel (17) until the corresponding indicator light for the desired
program lights up.
6.1 Unico MCV85
HARD FLOORING - Press and hold the steam trigger on the
handle for the desired length of time, up to a maximum of 30
P1
seconds. On release of the button, vacuuming will begin
automatically for the required time to dry the surface. Repeat
the operation until cleaning is complete.
BATHROOM - Press and hold the steam trigger on the handle
for the desired length of time. On release of the button,
P2
vacuuming will begin automatically for the required time to dry
the surface. Repeat the operation until cleaning is complete.
UPHOLSTERY -
handle both the steam and suction functions will be activated.
P3
Steam will be dispensed intermittently to preserve the delicate
surface.
6.2 Unico MCV80
HARD FLOORING - Press and hold the steam trigger on the
handle for the desired length of time, up to a maximum of 30
P1 seconds. On release of the button, vacuuming will begin
automatically for the required time to dry the surface. Repeat
the operation until cleaning is complete.
RUGS / CARPETS - By pressing and holding the trigger on the
handle both the steam and suction functions will be activated.
P2
Steam will be dispensed intermittently to preserve the delicate
surface.
GLASS - Press and hold the steam trigger on the handle for the
desired length of time, up to a maximum of 30 seconds. On
P3
release of the button, vacuuming will begin automatically for
the required time to dry the surface. Repeat the operation until
cleaning is complete.
| 33 |
By pressing and holding the trigger on the