MAXDATA 700T Benutzerhandbuch Seite 153

Configuring Your System
Boot Display Device:
There are three options to this field: Simul. Mode, LCD Only, and CRT Only. As
names of these options imply, LCD Only and CRT Only have the system boot up with
the designated display device "only". When Simul. Mode is chosen, both the LCD and
CRT would be displayed "simultaneously" if a CRT is connected to the system.
BootUp Num-Lock:
There are two options to this field: Off, and On. If On is selected, system would
automatically enable Num-Lock during System boot up.
st
1 Boot Device:
There are five options to this field: Disabled, IDE HDD, Floppy, CD/DVD, and
Network. In general, you should use CD/DVD as the system's first choice of boot
device.
nd
2 Boot Device:
There are four options to this field: Disabled, IDE HDD, Floppy, and CD/DVD. In
general, you should use Floppy as the system's second choice of boot device.
rd
3 Boot Device:
There are four options to this field: Disabled, IDE HDD, Floppy, and CD/DVD. In
general, you should use IDE HDD as the system's third choice of boot device.
Try Other Boot Devices:
There are two options to this field: Yes, and No. If Yes has been selected and all 3 Boot
Devices above fail to boot the system, system would attempt to boot from other devices:
such as through LAN card, and PCMCIA SCSI devices.
Page 11-14
Information in this document is subject to change without notice!!!
Model 400M & 700T User's Manual