Windows Me Users - Roland EDIROL UA-1EX Bedienungsanleitung

Windows Me users

1. With the UA-1EX disconnected, start up Windows.
* Disconnect all USB cables except for a USB keyboard and USB mouse (if used).
2. Exit all currently running software (applications).
If you are using virus checking or similar software, be sure to exit it as well.
3. Place the UA-1EX's ADVANCED (mode select) switch in the OFF position.
4. Connect the UA-1EX to the computer.
Windows will detect the UA-1EX, and the "Add New
Hardware Wizard" dialog box will appear.
Make sure that Automatic search for a better driver
(Recommended) is selected, and click [Next].
* This unit is equipped with a protection circuit. A brief interval (a
few seconds) after connecting the UA-1EX is required before the
unit will operate normally.
5. Driver detection will begin.
6. When the driver has been found, driver installation will begin.
7. Once the driver has been installed, a dialog box will inform
you of this.
Click [Finish].
8. Restart Windows.
Next, you will need to make audio input/output device settings.
(➝Input/output device setting (p. 49))
46